1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor

1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor

1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor

1930's Selective Vending (4 way) penny operated vending machine in working condition. This is a vendor that does not turn up very often. It is 18 tall, so fairly large.

Large watermelon size original globe in good condition, old paper decals are attached, probably old copies. One pull handle shows a crack, not loose and is shown in the pictures. I have enjoyed the machine for several years but decided to let it go.

I would guess that this vendor was one of them too. The coin door is recast and the machine on front of the magazine was also missing the coin door. I found that a barrel lock works best at keeping the coin door pushed upward and tighter than a standard padlock. An original NC20 barrel lock with new key is included.

This vendor uses 4 glass panel dividers inside. One is shorter and it has to be since it rests on top of a mechanism in the front.

I would guess that the glass dividers were cut and made back when these machines turned up. It takes 3-4 hands to put the glass panels inside and install the globe too.

The globe will not drop over the glass panels if they are installed first. It all has to be done in a certain order.

The top hold down ring locks all of the panels in place as you put it together. If you are going to the Chicago Coin-op show next week, I will fully assemble this and will deliver for free if machine is paid for in advance. Must be picked up before lunch time on Friday.

If not, I will pack it well for the trip. You will have to get a friend to help with assembly though after it arrives. Well packed double boxed UPS in the U.

The item "1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor" is in sale since Saturday, November 04, 2017. This item is in the category "Collectibles\Banks, Registers & Vending\Vending Machines\Gumball". The seller is "silentsalesman" and is located in Bardstown, Kentucky. This item can be shipped to United States.
1930's Selective 4 WAY Penny Vending Machine Vintage One Cent Vendor